Table of Contents

1 -  AS/NZS 1301.215s:2007 METHODS OF TEST FOR PULP AND PAPER - METHOD 215S: REMOVAL OF LATENCY
4 -  Contents
5 -  Foreword
6 -  Introduction
7 -  1 Scope
7 -  2 Normative references
7 -  3 Apparatus
7 -  4 Preparation of sample
7 -  5 Determination of moisture content
7 -  6 Procedure
8 -  6.1 Preparation of test sample
8 -  6.2 Removal of latency
8 -  7 Test report
10 -  Annex A - Bibliography

Scope

This standard sets out a method for the removal of latency from all high yield pulps that have been produced at elevated temperature and cooled before the concentration is reduced. The method involves disintegration at low consistency and elevated temperature followed by rapid cooling to an even lower consistency. To ensure rapid cooling, the use of ice is recommended.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
Pages
ISBN
Committee	PK-019
Supersedes	AS/NZS 1301.215s:1997 DR 06664 CP