Table of Contents

1 -  AS 4292.3-2006 RAILWAY SAFETY MANAGEMENT - ROLLING STOCK
4 -  PREFACE
5 -  CONTENTS
6 -  FOREWORD
7 -  SECTION 1 SCOPE AND GENERAL
7 -  1.1 SCOPE
7 -  1.2 APPLICATION
7 -  1.3 REFERENCED DOCUMENTS
8 -  1.4 DEFINITIONS
8 -  1.4.1 Permissible rolling stock outline
8 -  1.4.2 Cross level
8 -  1.4.3 Safeworking system
8 -  1.4.4 Shall
8 -  1.4.5 Should
8 -  1.4.6 Validation
8 -  1.4.7 Verification
8 -  1.5 FUNCTIONAL AREAS
9 -  1.6 ASSET LIFE CYCLE
11 -  1.7 ADOPTION OF EXISTING PRACTICES
11 -  1.8 HAZARD IDENTIFICATION AND RISK ANALYSIS
11 -  1.9 COMMUNICATION
11 -  1.10 HANDLING OF EXCEPTIONS
12 -  SECTION 2 INTERFACE COORDINATION
13 -  SECTION 3 DESIGN
13 -  3.1 GENERAL
13 -  3.2 OPERATING PARAMETERS
13 -  3.3 ROLLING STOCK ITEMS
13 -  3.4 VERIFICATION AND VALIDATION
15 -  SECTION 4 CONSTRUCTION AND IMPLEMENTATION
15 -  4.1 GENERAL
15 -  4.2 ROLLING STOCK REQUIREMENTS
15 -  4.3 VERIFICATION AND VALIDATION
16 -  SECTION 5 COMMISSIONING
16 -  5.1 GENERAL
16 -  5.2 INSPECTION AND TEST PLAN
16 -  5.3 COMMISSIONING TESTS
17 -  SECTION 6 MONITORING AND MAINTENANCE
17 -  6.1 GENERAL
17 -  6.2 MONITORING REQUIREMENTS
17 -  6.2.1 Detailed requirements
17 -  6.2.2 Matters to be included
17 -  6.2.3 In-service inspections
18 -  6.3 MAINTENANCE REQUIREMENTS
19 -  SECTION 7 MODIFICATION
20 -  SECTION 8 DECOMMISSIONING AND DISPOSAL
21 -  APPENDIX A - ROLLING STOCK AND STRUCTURE CLEARANCES
22 -  APPENDIX B - ASSET LIFE CYCLES PHASES-DESCRIPTION AND PROCESS REQUIREMENTS
27 -  APPENDIX C - INTERFACES BETWEEN ENGINEERING AND OPERATIONAL FUNCTIONS
31 -  APPENDIX D - ROLLING STOCK TECHNICAL ELEMENTS
31 -  D1 GENERAL
31 -  D2 VEHICLE STRUCTURE
31 -  D2.1 Detailed recommendations
31 -  D2.2 Factors to be considered
31 -  D3 VEHICLE SUSPENSION
31 -  D3.1 Detailed recommendations
32 -  D3.2 Factors to be considered
32 -  D4 COUPLING AND DRAW GEAR
32 -  D4.1 Detailed recommendations
32 -  D4.2 Factors to be considered
32 -  D5 ELECTRICAL COUPLINGS AND EQUIPMENT
32 -  D5.1 Detailed recommendations
33 -  D5.2 Factors to be considered
33 -  D6 BRAKING SYSTEMS
33 -  D6.1 Detailed recommendations
33 -  D6.2 Factors to be considered
33 -  D7 MOTIVE POWER SYSTEM
33 -  D7.1 Detailed recommendations
34 -  D7.2 Factors to be considered
34 -  D8 WHEEL SETS
34 -  D8.1 Detailed recommendations
34 -  D8.2 Factors to be considered
34 -  D9 OPERATION OF ROLLING STOCK-SAFETY ELEMENTS
35 -  D10 ROLLING STOCK RECOVERY EQUIPMENT
35 -  D10.1 Detailed recommendations
35 -  D10.2 Factors to be considered
36 -  APPENDIX E - SAFETY ASSESSMENT OF ROLLING STOCK
36 -  E1 GENERAL
36 -  E2 PRIMARY LIST-SAFETY CRITICAL ITEMS
37 -  E3 SECONDARY LIST-DISCRETIONARY ITEMS

Abstract

Specifies technical requirements for rolling stock to be considered for inclusion in engineering and operating systems safety Standards forming part of a railway safety management system prepared in accordance with AS 4292.1.

Scope

This Standard specifies requirements and provides guidelines for preparing or adopting engineering and operating systems safety standards and procedures to comply with the relevant requirements of AS 4292.1, in respect of rolling stock.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	ME-079
Supersedes	DR 05555 AS 4292.3-1997