Table of Contents

Abstract

Provides a guide to the features and typical properties that are expected of a water-borne latex primer paint for interior and exterior use on zinc and zinc alloy surfaces (e.g., galvanized iron), when applied by brush, roller or sprayer, in accordance with manufacturer‘s instructions.
RECONFIRMATION NOTICE
Technical Committee CH-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 27 April 2016.
The following are represented on Technical Committee CH-003:
Australasian Corrosion Association
Australian Institute of Building
Australian Paint Manufacturers’ Federation
Australian Wall and Ceiling Association
CSIRO
Institution of Professional Engineers New Zealand
Master Painters Australia
Master Painters New Zealand Association
National Association of Testing Authorities Australia
National Painting and Decorating Institute
Safe Work Australia
Surface Coatings Association Australia

Scope

This document provides a guide to the features and typical properties that are expected of a water-borne latex, primer paint for interior and exterior use on zinc and zinc alloy surfaces (e.g., galvanized iron) when applied by brush, roller or spray, in accordance with manufacturer’s instructions.
Paints covered by this guide are classified as Paint Type B12A of AS/NZS 2311.
The guide deals with primers that are to be further coated with latex paints or solvent-borne paints.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 17/06/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 17/06/2016
Pages
ISBN
Committee	CH-003
Supersedes	AS 3730.15-1991 DR 03607 CP