Table of Contents

1 -  AS 3545-2004 WELDING POSITIONS
4 -  PREFACE
5 -  CONTENTS
6 -  1 SCOPE
6 -  2 REFERENCED DOCUMENTS
6 -  3 DEFINITIONS
6 -  3.1 Rotation (R)
7 -  3.2 Slope (S)
7 -  3.3 Working position
9 -  4 WORKING POSITIONS
9 -  4.1 Main positions
12 -  4.2 Inclined positions
12 -  4.2.1 Plates and longitudinal welds in pipes
13 -  4.2.2 Circumferential welds in pipes
15 -  5 DESIGNATION
16 -  APPENDIX A - ALTERNATIVE POSITION DESCRIPTIONS
16 -  A1 GENERAL
16 -  A2 LIMITS
16 -  A3 VARIATIONS

Abstract

Defines working positions for welding. Includes means to locate position of welds in space.

Scope

This Standard defines working positions for welding, and makes it possible to locate welds in space with reference to the horizontal reference plane (usually parallel to the workshop floor) by means of angles of slope and rotation, which are independent from surrounding construction.
NOTE: For guidance on alternative position descriptions, see Appendix A.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
Pages
ISBN
Committee	WD-001
Supersedes	DR 04239 CP AS 3545-1988