Table of Contents

1 -  AS 4045.1:2003 PREPARED UNSHAPED REFRACTORY MATERIALS - DENSE
4 -  PREFACE
4 -  CONTENTS
5 -  1 SCOPE
5 -  2 REFERENCED DOCUMENTS
5 -  3 DEFINITIONS
5 -  3.1 Prepared unshaped refractory materials
5 -  3.2 Ceramic bond
5 -  3.3 Chemical bond
5 -  3.4 Hydraulic bond
5 -  3.5 Organic bond
5 -  3.6 Coatings
6 -  3.7 Granular size
6 -  3.8 Mortars
6 -  3.9 Mouldable refractory materials
6 -  3.10 Refractory castables
6 -  3.11 Refractory gunning materials
6 -  3.12 Refractory ramming materials
6 -  4 TYPE OF USE
6 -  4.1 General
6 -  4.2 Materials for monolithic construction and for repairs
7 -  4.3 Materials for placing and jointing
7 -  4.4 Coatings
7 -  5 CLASSIFICATION
8 -  6 DESIGNATION

Abstract

Sets out a classification and designation of prepared unshaped dense refractory materials. It does not apply to refractory materials that have been crushed or granulated.

RECONFIRMATION NOTICE
Technical Committee MN-007 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 4 April 2013.
The following are represented on Technical Committee MN-007:

Australasian Institute of Mining and Metallurgy
Australian Ceramic Society
Bureau of Steel Manufacturers of Australia
Cement Industry Federation
CSIRO Manufacturing & Materials Technology
Institute of Refractories Engineers
Refractories Manufacturers Association of Australia
The University of New South Wales

To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

This Standard provides a classification and designation of prepared unshaped dense refractory materials. It does not apply to refractory materials that have been crushed or granulated.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 05-07-2013
Pages
ISBN
Committee	MN-007
Supersedes	AS 4045.1-1993 DR 02460 CP