Table of Contents

1 -  AS/NZS 3744.1:1998 FURNITURE-ASSESSMENT OF THE IGNITABILITY OF UPHOLSTERED FURNITURE - IGNITION SOURCE-SMOULDERING CIGARETTE
4 -  PREFACE
5 -  0 Introduction
5 -  1 Scope and field of application
5 -  2 Reference
5 -  3 Definitions
5 -  4 Criteria of ignition
5 -  4.1 Progressive smouldering ignition
5 -  4.2 Flaming ignition
5 -  5 Principle
6 -  6 Health and safety of operators
6 -  6.1 General
6 -  6.2 Enclosure
6 -  6.3 Extinguishers
6 -  7 Apparatus
6 -  7.1 Test rig
6 -  7.2 Test enclosure
6 -  7.3 Clock
6 -  7.4 Ignition source: smouldering cigarette
6 -  8 Atmospheres for conditioning and testing
6 -  8.1 Conditioning
7 -  8.2 Testing
7 -  9 Test assembly
7 -  9.1 General
7 -  9.2 Cover material and interliner
7 -  9.2.1 Rig cover material
7 -  9.3 Upholstery filling
7 -  10 Test procedure
7 -  10.1 Preparation
7 -  10.2 Ignition source application
8 -  10.3 Final examination
8 -  11 Test report
11 -  Annex A - Guidance notes for designers and specifiers
12 -  Annex B - Model report form
14 -  APPENDIX ZZ - LIST OF VARIATIONS BETWEEN THIS STANDARD AND ISO 8191-1:1987
15 -  APPENDIX ZA - FORM OF REFERENCE IN OTHER LITERATURE
15 -  ZA1 FORM OF REFERENCE IN OTHER STANDARDS
15 -  ZA2 FORM OF REFERENCE IN COMMERCIAL LITERATURE

Abstract

This Standard is technically equivalent to and has been reproduced from ISO 8191-1:1987.

RECONFIRMATION NOTICE
Technical Committee CS-086 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 4 June 2013.
Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 31 May 2013.
The following are represented on Technical Committee CS-086:

Australian and New Zealand Burn Association
Australian Competition and Consumer Commission
Australian Compliance Institute
Australian Industry Group
Australian Retailers Association
AWTA Textile Testing
Consumers Federation of Australia
Council of Textile and Fashion Industries of Australia
CSIRO Manufacturing & Materials Technology
Kidsafe
Ministry of Consumer Affairs (New Zealand)
National Retailers Association
NSW Office of Fair Trading
Retail and Wholesale Merchants Association of New Zealand
RMIT University
Royal New Zealand Plunket Society


To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

This part of ISO 8191 lays down a method of test to assess the ignitability of material combinations, such as covers and fillings used in upholstered seating when subjected to a smouldering cigarette as an ignition source.

The tests measure only the ignitability of a combination of materials used in upholstered seating and not the ignitability of a particular finished item of furniture incorporating these materials. They give an indication of, but cannot guarantee, the ignition behaviour of the finished item of furniture.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 29-07-2013
Pages
ISBN
Committee	CS-086
Supersedes	AS 3744.1-1989 DR 97186 CP