Table of Contents

1 -  AS 2755.2-1985 MEASUREMENT OF FLAME SPREAD PROPERTIES OF VERTICALLY ORIENTED SPECIMENS
1 -  1 SCOPE AND APPLICATION.
1 -  2 REFERENCED DOCUMENT.
1 -  3 DEFINITIONS.
1 -  3.1 Afterflame
1 -  3.2 Afterflame time
1 -  3.3 Afterglow
1 -  3.4 Afterglow time
1 -  3.5 Flame spread time
1 -  4 PRINCIPLE.
1 -  5 HEALTH AND SAFETY OF TEST OPERATORS.
1 -  6 APPARATUS AND MATERIALS.
1 -  6.1 Construction of Testing Equipment.
1 -  6.2 Location of Test.
1 -  6.3 Template.
1 -  6.4 Specimen Holder.
1 -  6.5 Gas Burner.
1 -  6.6 Gas.
1 -  6.7 Marker Threads.
1 -  6.8 Timing Devices.
2 -  6.9 Measuring Instruments.
2 -  7 TEST SPECIMENS.
2 -  7.1 Size.
2 -  7.2 Pin Location Marks.
2 -  7.3 Number.
2 -  7.4 Conditioning of Test Specimens.
2 -  8 PROCEDURE.
2 -  9 PRECISION.
2 -  10 TEST REPORT.
5 -  APPENDIX A - DESCRIPTION AND CONSTRUCTION OF THE BURNER*
5 -  A1 DESCRIPTION.
5 -  A2 CONSTRUCTION.
5 -  A2.1 Gas jet.
5 -  A2.2 Burner tube.
5 -  A2.3 Flame stabilizer.
7 -  APPENDIX B - EXPERIMENTAL TECHNIQUES
8 -  ANNEX - EXPLANATORY REPORT TO ISO 6941

Abstract

Part 2 describes a procedure in which the textile material is held vertically in a frame. A small flame is used to ignite the specimen and the time is measured for the flame to spread up the specimen past a number of trip threads which record the time interval.

RECONFIRMATION NOTICE
Technical Committee CS-086 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 4 June 2013.
The following are represented on Technical Committee CS-086:
Australian and New Zealand Burn Association
Australian Competition and Consumer Commission
Australian Compliance Institute
Australian Industry Group
Australian Retailers Association
AWTA Textile Testing
Consumers Federation of Australia
Council of Textile and Fashion Industries of Australia
CSIRO Manufacturing & Materials Technology
Kidsafe
Ministry of Consumer Affairs (New Zealand)
National Retailers Association
NSW Office of Fair Trading
Retail and Wholesale Merchants Association of New Zealand
RMIT University
Royal New Zealand Plunket Society


To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

This standard sets out a method for the measurement of flame spread properties of vertically oriented textile fabrics intended for apparel, curtains and draperies in the form of single- or multi-component (coated, quilted, multilayered, sandwich construction and similar combinations) fabrics.

NOTE: This standard takes into account the development of ISO 6941 and is technically identical with that standard. The Explanatory Report of the development of ISO 6941 is given in the Annex to this standard.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 11-07-2013
Pages
ISBN
Committee	CS-086
Supersedes	DR 81052