Table of Contents

Foreword
1 Scope
2 Normative references
3 Definitions and abbreviations
  3.1 Definitions
  3.2 Abbreviations
4 General test
  4.1 Test conditions
  4.2 Arrangements for test signals at the input of
      the transceiver
  4.3 Normal test modulation
  4.4 Connection of test signals for transceivers
  4.5 Connection of test signals for receiver-only
      equipment
  4.6 Receiver test signal level
  4.7 Narrow band responses on receivers or
      receivers which are part of transceivers
  4.8 Exclusion bands
5 Performance assessment
  5.1 General
  5.2 Equipment classification
  5.3 Ancillary equipment
  5.4 Assessment of host connected equipment and
      plug-in cards
  5.5 Performance assessment test procedure to
      verify no loss of user control functions or
      stored data for CT2 transceivers
  5.6 Performance assessment of audio breakthrough
6 Performance criteria
  6.1 Performance criteria for Continuous phenomena
      applied to CT2 Transceivers (CT)
  6.2 Performance criteria for Transient phenomena
      applied to CT2 Transceivers (TT)
  6.3 Performance criteria for Continuous phenomena
      applied to CT2 Receive-only equipment (CR)
  6.4 Performance criteria for Transient phenomena
      applied to CT2 Receive-only equipment (TR)
7 Applicability overview tables
  7.1 Emission
  7.2 Immunity
8 Test methods and limits for emission tests of
  transceivers and/or receivers and/or ancillary
  equipment
  8.1 Test configuration
  8.2 Enclosure
  8.3 DC power input/output port
  8.4 AC mains power input/output port
9 Test methods and levels for immunity tests of
  transceivers and/or receivers and/or ancillary
  equipment
  9.1 Test configuration
  9.2 Radio frequency electromagnetic field (80 to
      1000 MHz)
  9.3 Electrostatic discharge
  9.4 Fast transients common mode
  9.5 RF common mode, 0.15 MHz to 80 MHz (current
      clamp injection)
  9.6 Transients and surges, vehicular environment
  9.7 Voltage dips and interruptions
  9.8 Surges, common and differential mode
Annex A (normative): ETS 300 446, EMC Standard for
        Cordless Telephone (CT2) apparatus
        operating in the frequency band 864.1 MHz to
        868.1 MHz including public access services
Annex B (normative): Clauses and/or subclauses from
        I-ETS 300 131 [3] which are relevant for
        compliance with essential requirements of the
        EC Council Directives
  B.1 CTAs without integral or supplied antenna
  B.2 Unmodulated interfering carrier signal
  B.3 Blocking due to spurious responses
  B.4 Spurious emissions of the combined
      transmitter/receiver
Annex C (normative): Clauses and/or subclauses from
        I-ETS 300 131 Second Edition [4] which are
        relevant for compliance with essential
        requirements of the EC Council Directives
  C.1 CTAs without integral or supplied antenna
  C.2 Unmodulated interfering carrier signal
  C.3 Blocking due to spurious responses
  C.4 Spurious emissions of the combined
      transmitter/receiver
Annex D (normative): ERC Decision on the adoption
        of approval regulations for radio equipment
        to be used for cordless telephone apparatus
        operating in the mobile service in the
        frequency range 864.1 MHz to 868.1 MHz, based
        on the Interim European Telecommunications
        Standard (I-ETS) 300 131 [3], [4]
History

Abstract

Defines EMC standard for cordless telephones CT2. Suitable for demonstration of compliance with requirements of EMC Directive 89/336/EEC

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	European Telecommunications Standards Institute
Pages
ISBN
Committee	RES 9
Supersedes	PRETS 300 446 : NOV 96