Table of Contents

Foreword
1 Scope
2 Normative references
3 Definitions, abbreviations and symbols
  3.1 Definitions
  3.2 Abbreviations
  3.3 Symbols
4 Test conditions
  4.1 General
  4.2 Normal test modulation
  4.3 Arrangements for test signals at the input of
      the base transmitter
  4.4 Arrangements for test signals at the output of
      the base transmitter
  4.5 Arrangements for test signals at the input of
      the pocket receiver
  4.6 Arrangements for test signals at the output of
      the pocket receiver
  4.7 Arrangements for test signals at the output of
      the pocket transmitter
  4.8 Arrangements for test signals at the input of
      the base receiver
  4.9 Arrangements for test signals at the output of
      the base receiver
  4.10 Exclusion bands
  4.11 Narrowband responses on receivers
5 Performance assessment
  5.1 General
  5.2 Standard paging equipment
  5.3 Special equipment and stand alone tested
      ancillary equipment
  5.4 Equipment classification
  5.5 Ancillary equipment
6 Performance criteria
  6.1 Performance criteria for Continuous phenomena
      applied to Transmitters (CT)
  6.2 Performance criteria for Transient phenomena
      applied to Transmitters (TT)
  6.3 Performance criteria for Continuous phenomena
      applied to Receivers (CR)
  6.4 Performance criteria for Transient phenomena
      applied to Receivers (TR)
7 Applicability overview tables
  7.1 Emission
  7.2 Immunity
8 Test methods for emission tests for transmitters
  and/or receivers and/or ancillaries
  8.1 Test configuration
  8.2 Enclosure
  8.3 DC power input/output ports
  8.4 AC mains power in/out
9 Test methods for immunity tests for transmitters
  and/or receivers and/or ancillaries
  9.1 Test configuration
  9.2 Radio frequency electromagnetic field (80 - 1000
      MHz)
  9.3 Electrostatic discharge
  9.4 Fast transients common mode
  9.5 Radio frequency common mode (current clamp
      injection)
  9.6 Voltage dips and interruptions
  9.7 Surges common and differential mode
Annex A (normative): Subclauses of this ETS relevant
         for compliance with the essential
         requirements of EC Council Directives
History

Abstract

Covers the EMC requirements for private paging equipment. The ETS, together with ETS 300 224, may be used to demonstrate compliance with the requirements of the EMC Directive 89/336/EEC.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	European Telecommunications Standards Institute
Pages
ISBN
Committee	RES 9
Supersedes	PRETS 300 682 : JAN 97