Table of Contents

Foreword
1 Scope
2 Normative references
3 Definitions and abbreviations
  3.1 Definitions
  3.2 Abbreviations
4 General test conditions
  4.1 Test conditions
  4.2 Arrangements for test signals at the input of
      the transceiver
  4.3 Normal test modulation
  4.4 Connection of test signals for transceivers
  4.5 Connection of test signals for receiver-only
      equipment
  4.6 Receiver test signal level
  4.7 Narrow band responses on receivers or receivers
      which are part of transceivers
5 Performance assessment
  5.1 General
  5.2 Equipment classification
  5.3 Ancillary equipment
  5.4 Assessment of host connected equipment and
      plug-in cards
  5.5 Performance assessment test procedure to verify
      no loss of user control functions or stored data
      for DECT transceivers
  5.6 Performance assessment of audio breakthrough
6 Performance criteria
  6.1 Performance criteria for Continuous phenomena
      applied to DECT Transceivers (CT)
  6.2 Performance criteria for Transient phenomena
      applied to DECT Transceivers (TT)
  6.3 Performance criteria for Continuous phenomena
      applied to DECT Receive-only equipment (CR)
  6.4 Performance criteria for Transient phenomena
      applied to DECT Receive-only equipment (TR)
7 Applicability overview tables
  7.1 Emission
  7.2 Immunity
8 Test methods and limits for emission tests of
  transceivers and/or receivers and/or ancillary
  equipment
  8.1 Test configuration
  8.2 Enclosure, ancillary equipment tested in
      isolation
  8.3 DC power input/output port
  8.4 AC mains power input/output port
9 Test methods for immunity tests of transceivers
  and/or receivers and/or ancillary equipment
  9.1 Test configuration
  9.2 Radio frequency electromagnetic field (80 -
      1000 MHz)
  9.3 Electrostatic discharge
  9.4 Fast transients common mode
  9.5 RF common mode, 0,15 MHz - 80 MHz
  9.6 Transients and surges, vehicular environment
  9.7 Voltage dips and interruptions
  9.8 Surges, common and differential mode
Annex A (normative): Subclauses of this ETS relevant
                     for compliance with the essential
                     requirements of the EC Council
                     Directives
History

Abstract

Covers the EMC requirements for DECT equipment. This amendment makes the necessary modifications to bring ETS 300 329 into line with the policy described in ETR 238. This ETS is intended to be published in the official journal of the European Communities referencing the ENC Directive.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	European Telecommunications Standards Institute
Pages
ISBN
Committee	RES 9
Supersedes	PRETS 300 329 : JAN 97