Table of Contents

FOREWORD
INTRODUCTION
SECTION 1 - GENERAL
  1.1 Scope
  1.2 Normative references
  1.3 General format
  1.4 Bulb shape
  1.5 Definitions
SECTION 2 - LAMP CHARACTERISTICS AND SPECIFICATIONS
  2.1 Lamp characteristics and specifications
SECTION 3 - GENERAL, DIMENSIONAL, ELECTRICAL, PHOTOMETRIC,
            AND LIFE REQUIREMENTS
  3.1 General
  3.2 Marking
  3.3 Lamp dimensions
  3.4 Characteristics and tolerances of initial readings
  3.5 Lumen maintenance
  3.6 Life test requirements
SECTION 4 - CONDITIONS OF COMPLIANCE
  4.1 Whole production of a manufacturer
  4.2 Compliance of individual batches
SECTION 5 - SAMPLING
  5.1 Principles of sampling
  5.2 Sampling for whole production testing
  5.3 Sampling for batch testing
SECTION 6 - PRINCIPLES OF DIMENSIONING
  6.1 Principles of dimensioning incandescent lamps with
      bulb shape A or PS, and cap B22d
  6.2 Principles of dimensioning incandescent lamps with
      bulb shape A or PS, and Edison screw cap
SECTION 7 - ANNEXES
A Test procedure
B Life calculation and limits
C Recommended pre-compliance tests for certification purposes
D Statistical compliance tables
E Statistical concepts and basis of this standard
F Test rack circuit characteristics
SECTION 8 - LAMP DATA SHEETS
  8.1 List of lamp data sheets and ILCOS codes

Abstract

Applicable to tungsten filament incandescent lamps for general lighting service (GLS) which comply with the safety requirements in IEC 60432-1 and having: - rated wattage of 25 W to 200 W, inclusive; - rated voltage 100 V to 250 V, including marked voltage range not exceeding +/- 2,5% of the mean voltage; - bulbs of the A or PS shapes; - bulbs with clear, frosted or equivalently coated finishes, or white finishes; - caps B22d, E26 or E27.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
Pages
ISBN
Committee	TC 34
Supersedes	IEC 60064A : 1979