Table of Contents

Chapter 1 - Scope
Chapter 2 - Definitions
  2.1 Introduction
  2.2 Terms
  2.3 Bibliography
Chapter 3 - General need guidelines
  3.1 Introduction
  3.2 Lighting
  3.3 Startup power
  3.4 Transportation
  3.5 Mechanical utility systems
  3.6 Heating
  3.7 Refrigeration
  3.8 Production
  3.9 Space conditioning
  3.10 Fire protection
  3.11 Data processing
  3.12 Life safety and life support systems
  3.13 Communication systems
  3.14 Signal circuits
  3.15 References
  3.16 Bibliography
Chapter 4 - Generator and electric utility systems
  4.1 Introduction
  4.2 Engine-driven generators
  4.3 Multiple utility services
  4.4 Turbine-driven generators
  4.5 Mobile equipment
  4.6 References
  4.7 Bibliography
Chapter 5 - Stored energy systems
  5.1 Introduction
  5.2 Definitions
  5.3 Battery systems
  5.4 Mechanical energy storage
  5.5 Battery/inverter systems
  5.6 Motor-generators and rotating UPS systems
  5.7 References
  5.8 Bibliography
Chapter 6 - Protection
  6.1 Introduction
  6.2 Short-circuit current considerations
  6.3 Transfer devices
  6.4 Generator protection
  6.5 Prime mover protection
  6.6 Electric utility power supply
  6.7 Uninterruptible power supply (UPS) system
  6.8 Equipment physical protection
  6.9 Grounding
  6.10 Conclusions
  6.11 References
  6.12 Bibliography
Chapter 7 - Grounding
  7.1 Introduction
  7.2 System and equipment grounding functions
  7.3 Supplemental equipment bonding
  7.4 Objectionable current through grounding conductors
  7.5 System grounding requirements
  7.6 Types of equipment-grounding conductors
  7.7 Grounding for separately derived and service-supplied
        systems
  7.8 Grounding arrangements for emergency and standby
        power systems
  7.9 Systems with a grounded circuit conductor
  7.10 Ground-fault alarm
  7.11 Systems without a grounded circuit conductor
  7.12 Mobile engine-generator sets
  7.13 Uninterruptible power supply (UPS) systems
  7.14 References
  7.15 Bibliography
Chapter 8 - Maintenance
  8.1 Introduction
  8.2 Internal combustion engines
  8.3 Gas turbine
  8.4 Generators
  8.5 Uninterruptible power supply (UPS) systems
  8.6 Stationary batteries
  8.7 Automatic transfer switches
  8.8 Conclusions
  8.9 References
  8.10 Bibliography
Chapter 9 - Specific industry applications
  9.1 General
  9.2 References
Chapter 10 - Design and operation considerations for improving
             the reliability of emergency power systems
 10.1 Introduction
 10.2 Applications
 10.3 Environmental concerns
 10.4 Specification and acceptance testing
 10.5 Maintenance and training
 10.6 Failure modes
 10.7 Management awareness
 10.8 Conclusions
 10.9 References
 10.10 Bibliography
Index

Abstract

Describes recommended engineering principles, practices, and guidelines for the selection, design, installation, application, operation, and maintenance of emergency and standby power systems.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Institute of Electrical & Electronics Engineers
Pages
ISBN